Scheppach TBD55 Originalbetriebsanleitung Seite 44

c) Avoid unintentional startup. Make sure that the electric tool
is switched off before you connect it the power supply and/or
battery, pick it up or carry it.
Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove the setting tools or spanners before switching on the
electric tool. A tool or spanner that is located in a rotating device
part may result in injuries.
e) Avoid abnormal posture. Make sure that you have secure foot-
ing and always maintain your balance. This will allow you to better
control the electric tool in unexpected situations.
f) Wear suitable clothing. Do not wear wide clothing or jewellery.
Keep hair, clothing and gloves away from moving parts. Loose
clothing, jewellery and long hair can be caught by moving parts.
g) If dust extraction and collection devices can be mounted, make
sure that they are connected and used properly. Using a dust
extraction unit can reduce hazards caused by dust.
h) Do not allow yourself to be lulled into a false sense of security
and do not ignore the safety rules for electric tools, even when
you have used them many times and have become familiar with
them. Careless actions can result in serious injuries within a fraction
of a second.
Using and handling the electric tool
a) Do not overload the device. Use the electric tool intended for your
work. The suitable electric tool allows you to work better and more
safely in the indicated power range.
b) Do not use an electric tool whose switch is defective. An elec-
tric tool that cannot be switched on or off is dangerous and
must be repaired.
c) Remove the plug from the socket and/or take out a removable
battery before setting the device, changing insertion tool parts
or putting the electric tool away. These precautionary measures
will prevent the electric tool from starting unintentionally.
44 | GB
www.scheppach.com