Scheppach TBD55 Originalbetriebsanleitung Seite 43

Electrical safety
a) The electrical tool's connection plug must fit into the socket.
The plug may not be modified in any way. Do not use an adaptor plug
together with earthed electric tools. Unmodified plugs and suitable
sockets reduce the risk of an electric shock.
b) Avoid body contact with earthed surfaces, such as pipes, heat-
ers, ovens and refrigerators. There is an increased risk of elec-
tric shock if your body is earthed.
c) Keep electric tools away from rain and moisture. Water entering
an electric tool increases the risk of an electric shock.
d) Do not use the cable for another purpose, for example, carry-
ing or hanging the electric tool or pulling the plug out of the
socket. Keep the cable away from heat, oil, sharp edges or moving
device parts. Damaged or coiled cables increase the risk of an elec-
tric shock.
e) If you work with an electric tool outdoors, only use extension
cables that are also suitable for outdoor use. Using an extension
cable suitable for outdoor use reduces the risk of an electric shock.
f) If you cannot avoid using the electrical tool in a wet environ-
ment, use a fault-current circuit breaker. Using a fault-current cir-
cuit breaker reduces the risk of an electric shock.
Safety of personnel
a) Remain attentive, pay attention to what you are doing and be
sensible when working with electric tools. Do not use an elec-
tric tool if you are tired or under the influence of drugs, alco-
hol or medication. A moment of carelessness when using electrical
tools can result in serious injuries.
b) Wear personal protective equipment and always wear safety
goggles. Protective equipment such as a dust mask, non-skid safety
shoes, hard hat or hearing protection used for appropriate conditions
will reduce personal injuries.
www.scheppach.com
GB | 43