Calling-Up The Configuration Mode; Setting The Date And Time - Conrad WS222 Bedienungsanleitung

Please note:
If you press the + or - key during the individual settings a little bit longer, the values will
be changed rapidly.
After each setting procedure you can exit the configuration mode by pressing the EXIT
key or you can go the the next setting by activating the NEXT key.
The configuration is performed according to the following order:
year month
Längengrad (LO = "Longitude")
temperature unit
Afterwards, the setting order restarts from the beginning.
IN
-
+
NEXT
-
+
NEXT
-
+
NEXT
-
+
NEXT
-
+
NEXT
day minutes
Zeitzone (ti)
wind unit
Press the IN key for approx. 2 seconds till the display changes.
>2 seconds
The configuration mode can be closed at any time by pressing
the EXIT key (= MIN/MAX). See "Exiting the Configuration
Mode".
year
Set the current year via the + and - keys.
Press the NEXT key.
month
Set the month via the + and - keys.
Press the NEXT key.
day
Set the day via the + and - keys.
Press the NEXT key.
minutes
Set the minutes via the + and - keys.
Press the NEXT key.
hours
Set the hours via the + and - keys.
Press the NEXT key, afterwards you can set the latitude
degree (in the display appears LA = latitude). See next page.
hours latitude degree (LA = latitude)
assignment of the march indication

Calling-up the configuration mode

Setting the date and time

59