Key Functions - Conrad WS222 Bedienungsanleitung

Key Functions

Short key pressure:
IN
Switching between the indoor temperature indication and the dew point temperature
Long key pressure (min. 2 seconds, till the display changes):
Call-up of the configuration mode (see back of the housing for key layout)
If applicable, selection of additional outdoor sensors (display of SENSOR and sensor
SENSOR
number (1....8))
(if only the multipurpose sensor is used, the display will not change)
In the IN/MAX mode: indication of the point of time at which the MIN/MAX value has been
measured
Call-up of the MIN/MAX values:
MIN
press once:
MAX
press twice:
press three times:
During the MIN or MAX display, use the SENSOR key to call up/indicate the point of time
at which the MIN/MAX value has been measured
Sequence of indication:
indoor temperature
outdoor air humidity
Deletion of the currently displayed MIN/MAX value(s):
Press the RESET key for at least 2 seconds till the values indicated
are deleted (lines appear instead of numeric values)
In the MIN/MAX mode:
RESET
Long key pressure (at least for 2 seconds) deletes the corresponding MIN/MAX values
Switching between the outdoor temperature indication and the windchill temperature
OUT
82
MIN values (MIN appears in the display)
MAX values (MAX appears in the display)
back to normal display
indoor air humidity
wind speed (MAX value only)
outdoor temperature