Configuration And Operation; A) Basic Settings, Configuration - Conrad WS222 Bedienungsanleitung

9. Configuration and Operation

When the batteries have been inserted into the sensors and the batteries have been inserted
subsequently into the base station (this order is to be strictly followed), the data transmitted via radio
by the sensors should appear in the LC display of the base station.

a) Basic Settings, Configuration

The following settings are still required for operation:
• year, month, day, hour, minute
• latitude and longitude degrees of your location
• time zone
Only after these settings, the phase of the moon, MIN-/MAX-data and the sunrise/sunset
times as well as the date and time will be indicated.
Additional setting options:
• assignment of the march indication (air pressure, indoor or outdoor temperature; standard: air
pressure)
• unit of the temperature measurement (standard: °C)
• unit of the wind speed measurement (standard: km/h)
In the configuration mode the keys have the following functions:
Imprint
IN
SENSOR
MIN/MAX
RESET
OUT
This key layout is also given on the back side of the weather station.
58
Function Description
(not used, no function)
- Decrease value
EXIT Exit the configuration mode
+ Increase value
NEXT Go to next setting