Technical data
3 Technical data
3.1 Electrical characteristics
Supply voltage: ..................................................
At UL / CSA approval .................................
Current consumption without load: ................
Total resolution
CEx-58: .......................................................
COx-58: ......................................................
* Number of steps/revolution
CEx-58, standard: .......................................
CEx-58, expanded: .....................................
COx-58: ......................................................
* Number of revolutions
CEx-58, standard: .......................................
CEx-58, expanded: .....................................
COx-58: ......................................................
Output code
* CEx-58: ....................................................
COx-58: ....................................................
Standard Baud rates .........................................
Cycle time:..........................................................
Station addresses: ............................................
PROFIBUS-DP standard: ..................................
Transmission: ....................................................
Special features: ................................................
EMC
Immunity to disturbance: ............................
Transient emissions: ...................................
* parameterizable via PROFIBUS-DP
TR-Electronic GmbH 2004, All Rights Reserved
Page 68 of 115
11...27 VDC, twisted in pairs and shielded
According to NEC Class 2; 24 VDC (11-27 VDC)
< 350 mA at 11 VDC, < 150 mA at 27 VDC
33 bit, data size for actual position on the bus: 25 bit
36 bit, data size for actual position on the bus: 29 bit
8.192
32.768
262.144
4.096 revolutions
256.000 revolutions
262.144 revolutions
Binary, Gray, shifted Gray
Binary
9.6 kBaud to 12 MBaud
250 µs
3 - 99, set on BCD rotary switch
IEC 61158, IEC 61784
RS485, twisted and shielded copper cable with a single
conductor pair (cable type A)
Programming takes place via the parameterization
telegram when the measuring system or the PROFIBUS-
DP master starts up.
DIN EN 61000-6-2: 2006
DIN EN 61000-6-3: 2007
TR - ECE - BA - DGB - 00036 - 10
Printed in the Federal Republic of Germany
10/01/2014