5.2 Type with cable glands
5.2.1 Connection
The connection hood must first be removed from the measuring system to undertake
connection.
The four screws
Figure 1: Removing of the connection hood
PROFIBUS_IN
Pin 1
Pin 2
Pin 3
Pin 4
PROFIBUS_OUT
Pin 1
Pin 2
Pin 3
Pin 4
The terminals for the supply voltage (pin 3 / pin 4) are connected together internally
and can be used as feeding, as well as supply voltage for the subsequent slave.
Printed in the Federal Republic of Germany
10/01/2014
(A)
are unscrewed and the hood removed.
1
1
PROFIBUS Data A
PROFIBUS Data B
Supply voltage, 11-27 VDC
0 V, GND
PROFIBUS Data A
PROFIBUS Data B
Supply voltage, 11-27 VDC
0 V, GND
TR - ECE - BA - DGB - 00036 - 10
A
1
IN
TR-Electronic GmbH 2004, All Rights Reserved
Page 71 of 115
1
OUT