Service Intervals - Vari GLOBAL PJXP200 Bersetzung Der Originalbetriebsanleitung

LUBRICATION POINT
Engine oil filling
Lower holder and arresting pin's
head of the handlebars side
adjustment
Swivel holder pin of the handlebars
adjustment to sides
Thread of the tightening nut screw
of the handlebars height adjustment
Accelerator Bowden cable lubrication
Table 23: Lubrication intervals

2.7.2.3 Service intervals


Tighten regularly the handlebars elastic mount nuts and the upper joint nuts. They might become loose as the
result of the assembly operation. Loosening or loss of nuts may cause the machine breakdown with possible
injuries or damage to property of the operator or others.
Details of some service points are on Pict. 11, marked like this
ACTIVITY
Oil level check 38
Engine air filter check 39
The function of the safety switch
Clutch plate lining check
Tightening of the screwed connections
Cleaning of the connecting flange
Cleaning of the connecting flange
Lubrication
Table 24: Service intervals
38 Refer to the instructions for use for oil change intervals.
Refer to the instructions for use for air filter change intervals.
39
If the driving unit has been permanently mounted on the gearbox or adapter without being removed.
40
41 If the driving unit has been permanently mounted on the gearbox or adapter without being removed.
42 Dismantle the starter after the season and clean the the engine cooling fan - see the instructions for use of the engine.
24
IN SEASON AFTER SEASON
status check
yes
before each use
as needed yes
as needed yes
as needed yes
as needed yes
SERVICE
IN SEASON
status check before each use
before each use
before each use
each time the engine is mounted on the
gearbox or 1x a month 40
with visible signs of clutch plate wear check clutch lining on the driving unit
check before each use
in the case of wear (damage) replace the screw connection with a new one
each time the engine is mounted on the
gearbox or 1x a month 41
after each use
-
PJXP200 / PJGCVX200 / PJCV224
LUBRICANT
change after first 10 hours (running-in of
engine oil the engine), then after 100 hours of
operation or after the season
oil
plastic lubricant
spray vaseline
oil
plastic lubricant
spray vaseline
plastic lubricant
oil
. .
check and eventual fill to the MAXimum
level
yes
check, cleaning and degreasing
tightening
use original connecting components
degreasing
yes 42
see 23
NOTE
AFTER SEASON