En Instructions For Use; Introduction; Basic Warning; Operational Safety - Vari GLOBAL PJXP200 Bersetzung Der Originalbetriebsanleitung

2 EN Instructions for use
Content
2 EN Instructions for use............................................................................16
2.1 Introduction...................................................................................16
2.1.1 Basic warning.......................................................................16
2.2 Operational safety..........................................................................16
2.2.1 Safety Regulations................................................................16
2.2.2 Noise and vibration values...................................................17
2.2.3 Safety pictographs................................................................17
2.3 Basic information...........................................................................18
2.3.1 Use......................................................................................18
2.3.2 Fuel system protection against bio components......................18
2.3.3 Recommendations for operating HONDA motors at low
temperatures.................................................................................19
2.3.3.1 Operation...................................................................19
2.3.3.2 Storage......................................................................19
2.3.4 Technical data......................................................................19
2.3.5 Description of the machine and its parts................................19
2.4 Driving unit assembly.....................................................................19
2.5 Putting in operation........................................................................20
2.5.1 Attaching and removing the driving unit.................................20
2.5.1.1 Procedure for attaching the drive unit..........................20
The manufacturer reserves the right to make technical changes and innovations that do not affect the function and safety of the machine. These changes may not be reflected in these Instructions

2.1 Introduction

Dear customer and user!
Thank you for the confidence you have shown by purchasing our product. You became the owner of the heart of the modular system of
gardening, farming, small agricultural and municipal equipment manufactured by VARI, a.s. (JsC).
Driving units Models PJXP200, PJGCVX200 and PJCV224 serve to drive gearboxes and adapters for problem-free works such as active
and passive soil cultivation, pumping of liquids, cutting of stalky plants and grasses, removal of snow, sweeping of roads and other surfaces,
and transportation of all kinds of materials on one-axle trailers. Driving units have become popular among users thanks to very easy operation
and silent, high-performing and economic engines.
Please read the Instructions for use thoroughly. If you adhere to instructions presented herein, you will have our product performing a
reliable work for you for years.

2.1.1 Basic warning

You are obliged to get acquainted with the Instructions for use and to follow all instructions for machine operation so that the user's and
other persons' health and property do not suffer any harm.
Safety instructions contained in this manual do not describe all situations or conditions possibly occurring in practical use. Safety factors such
as common sense, caution and scrupulousness are not included in these Instructions for use; it is assumed, however, that all persons
authorized to operate or maintain the machine are sufficiently apt and in possession of such faculties.
Only persons of good mental and physical health can operate the machine. For the professional use of the machine the machine owner is
obliged to ensure work safety training and provide instructions on machine control for operators and to keep records on these trainings and
briefings. It must also carry out a so-called categorization of work according to relevant national legislation.
If you find any information in this guide incomprehensible, contact your dealer
Instructions for use supplied with the machine are an integral part of the machine. They have to be available at any time, placed at a well
accessible place with no risk of their damage. In the case that the machine is sold to another person, the Instructions for use must be given to
the new machine owner. If the above conditions are not met, the manufacturer bears no responsibility for incurred risks, accidents and injuries
resulting from the machine operation.
The manufacturer is not liable for damages caused by unauthorized use, improper machine operation, and damages caused by any machine
modifications without the consent of the manufacturer, and by using other than original parts.
During work with the machine it is especially important to follow the safety instructions to avoid the risk of injury to yourself, bystanders or
damage to property. These instructions are in the Instructions for use market with the safety warning symbol:
If you see this symbol in the Instructions for use, read the accompanying advice carefully!

This international safety symbol indicates important messages concerning safety. When you see this symbol, be

alert. There is a risk of injury to you or other persons. Read the following information carefully.
Table 14: Symbols

2.2 Operational safety

The machine is equipped with protective passive and active safety elements. Do not remove any of these elements. You run the risk of injury.

2.2.1 Safety Regulations


The machine operator must be 18 years or older. He/she must be familiar with the Instructions for use of the machine and have
knowledge of general principles of occupational safety and must possess a driving license class "A" or higher.
26 Fill in the dealer address in the table at the beginning of these Instructions for use (unless the dealer has already completed it).
27 Manufacturer's address is listed at the end of these Instructions for use.
16
for use. Printing errors reserved. The images may not show the actual design of the product.
PJXP200 / PJGCVX200 / PJCV224
2.5.1.2 Procedure for removing the driving unit.......................21
2.6 Controls........................................................................................21
2.6.1 Accelerator lever..................................................................21
2.6.2 Safety switch.......................................................................22
2.6.3 Starting the engine...............................................................22
2.6.4 Adjustment of guiding handles..............................................22
2.7 Maintenance, care, storage.............................................................23
2.7.1 Recommended tools and accessories.....................................23
2.7.2 Machine lubrication...............................................................23
2.7.2.1 Engine oil change.......................................................23
2.7.2.2 Lubrication points.......................................................23
2.7.2.3 Service intervals.........................................................24
2.7.3 Problems and their solutions.................................................25
2.7.4 Storage................................................................................25
2.7.4.1 Machine washing and cleaning.....................................26
2.7.5 Disposal of packaging and the machine at the end of lifetime. 26
2.7.6 Instructions for ordering spare parts......................................26
2.8 Manufacturer's contact information.................................................26
2.9 Picture appendix............................................................................27
26 or directly the manufacturer of the machine 27 .