Universal Cutter; Cleaning And Servicing - Bosch MultiTalent 3 MCM3 Serie Gebrauchsanleitung

■ Add the ingredients.
Maximum capacity, liquid = 1.0 litre
(frothing or hot liquids max. 0.4 litres).
■ Fit the lid and press on firmly. Hold the lid
while working.
■ Insert the mains plug.
■ Set the rotary switch to the desired setting.
■ To add more ingredients, set the rotary
switch to P.
■ Remove the lid and add ingredients
or
■ remove the funnel and gradually add solid
ingredients through the filler opening
or
■ pour liquid ingredients through the funnel.
After using the appliance
■ Set the rotary switch to P.
■ Pull out the mains plug.
■ Rotate the blender in an anticlockwise
direction and remove.
■ Remove the lid.
■ Release the blade insert clockwise (l)
and remove from the blender jug.
■ Clean all parts, see "Cleaning and
servicing".

Universal cutter

Use (depending on model):
– With the blade insert with blender/cutting
blade p, for cutting and chopping meat,
hard cheese, onions, herbs, garlic, fruit,
vegetables.
– With the blade insert with grinding blade
q, for grinding and chopping small
quantities of spices (e.g. pepper, cumin,
juniper, cinnamon, dried anise, saffron),
grain (e.g. wheat, millet, linseed), coffee or
sugar. It is not intended for grinding very
dry, solid foods that are larger than coffee
beans such as nutmeg, dry ginger ... .
Warning!
Only fill the appliance with roasted coffee or
espresso beans.
Fig. E
■ Set the universal cutter jug down with the
opening face up.
■ Add the food to be cut up to the jug. Note
the MAX mark on the jug!
■ Place the seal on the blade insert. Check
that the seal is positioned correctly.
Printed on 100% recycled paper

Cleaning and servicing

Important information
If the seal is damaged or not correctly
positioned, liquid may leak out.
■ Insert the blade insert (p/q) in the
universal cutter jug and lock anticlockwise
(m). Rotate the blade insert at least until
the arrow matches up with the marking on
the universal cutter jug.
■ Turn the universal cutter over (blade insert
face down).
■ Attach the universal cutter (match arrow
on jug to dot on appliance .) and
rotate as far as possible in a clockwise
direction (,).
■ Insert the mains plug.
■ Set the rotary switch to the desired setting.
Note: The longer the appliance remains
switched on, the finer the ingredients are cut.
Recommendations on using the accessories
can be found in the section "Recipes/
Ingredients/Processing".
After using the appliance
■ Set the rotary switch to P.
■ Pull out the mains plug.
■ Rotate the universal cutter anticlockwise
and remove.
■ Turn the universal cutter over (blade insert
face up).
■ Release the blade insert clockwise (l)
and remove from the universal cutter jug.
■ Empty the jug.
■ Clean all parts, see "Cleaning and
servicing".
Cleaning and servicing
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
An overview of cleaning the individual parts
can be found in Fig. J.
Clean all parts immediately after use. Doing
so prevents residue from drying on.
Warning!
Surfaces may be damaged. Do not use
abrasive cloths or cleaning agents.
Do not wedge plastic parts in the dishwasher
as they could warp.
en
27