After Using The Appliance - Bosch MultiTalent 3 MCM3 Serie Gebrauchsanleitung

en Operation
Reversible slicing/shredding disc
Grating raw potatoes or cutting into
slices.
Note: Not suitable for processing very
fibrous foods, e.g. leek or mango.
Fig. C
■ Attach the bowl (match arrow on bowl to
dot on appliance .) and rotate as far as
possible in a clockwise direction (,).
■ Insert the tool holder into the bowl.
Depending on the required use:
■ Place the cutting disc on the tool holder.
Turn the slicing/shredding side required
to face up. Place the disc on the disc
holder so that the drivers on the tool holder
engage in the opening in the discs.
■ Attach the lid with the pusher (match arrow
on lid with dot on bowl .) and rotate in a
clockwise direction (,). The lid lug must
be fully engaged in the slot in the bowl
handle.
■ Insert the mains plug.
■ Set the rotary switch to the desired setting.
■ Fill with the contents to be sliced or
shredded.
■ When pushing down ingredients for slicing
or shredding, only apply light pressure to
the pusher. Remove the pusher and add
ingredients through the filler opening.
Warning!
Empty the bowl before it becomes so full that
the ingredients for slicing or shredding reach
the carrier disc.

After using the appliance

■ Set the rotary switch to P.
■ Pull out the mains plug.
■ Rotate the lid anticlockwise and remove.
■ Take out the tool:
Take the tool holder with the universal
blade, beating disc or kneading hook out
of the bowl. Remove the tool from the tool
holder.
■ Take out the cutting discs by the plastic
stud in the middle. Take the tool holder out
of the bowl.
■ Rotate the bowl anticlockwise and remove.
■ Clean all parts, see "Cleaning and
servicing".
26
Blender
Blade insert with blender/cutting blade for
mixing liquid or semi-solid food, for mixing
light dough, for puréeing or crushing ice
cubes.
Warning!
Improper use may cause material damage.
■ Do not process food that contains hard
components, e.g. bones.
■ Do not process frozen ingredients (except
ice cubes).
■ Do not insert any objects into the blender
jug, e.g. wooden spoons.
■ Before use, check the blender jug for
foreign objects.
■ Do not operate the blender when empty.
Using unsuitable food may damage the
appliance.
■ Do not process food that is hotter than
70 °C in the blender jug.
Restrictions on processing:
■ Do not use it to chop ingredients like
almonds, onions, parsley and meat.
■ The blender cannot produce spreads such
as peanut butter, coconut butter or nut
spreads.
■ Use sufficient liquid when blending solid
food.
■ Mix powdered food with sufficient liquid
before blending or dissolve entirely in
liquid. Powdered food includes e.g. icing
sugar, cocoa powder, roasted soya beans,
flour, protein powder.
Fig. D
■ Place the seal on the blade insert. Check
that the seal is positioned correctly.
Important information
If the seal is damaged or not correctly
positioned, liquid may leak out.
■ Insert the blade insert with the blender/
cutting blade p in the blender jug and
lock anticlockwise (m). Rotate the blade
insert at least until the arrow matches up
with the marking on the blender jug.
■ Turn the blender jug over (blade insert
face down).
■ Attach the blender jug (match arrow on jug
to dot on appliance .) and rotate as far
as possible in a clockwise direction (,).
Printed on 100% recycled paper