Data.out." / "Pc.direc." Menu; Applic." / "Weigh" Menu - Sartorius Entris II Essential Serie Betriebsanleitung

Parameter Setting values
PRT.INIT. OFF
ALL*
MAIN.PAR.
GLP OFF*
CAL.-ADJ.
ALWAYS
TAR./PRT. OFF*
ON
TIME 24H*
12H
DATE DD.MMM.YY*
MMM.DD.YY
YY.MM.DD
* Factory setting
7.3.8

"DATA.OUT." / "PC.DIREC." Menu

Parameter Setting values
DEC.SEP. POINT*
COMMA
OUT.FORM. TXT+NUM.*
ONLY.NUM.
* Factory setting
7.3.9

"APPLIC." / "WEIGH" Menu

Parameter Setting values
UNIT ON*
OFF
RECALL ON
OFF*
APP.FILT. ON*
OFF
AMBIENT ON*
OFF
* Factory setting
Explanation
Deactivates the output of the application parameters.
The print command prints all parameters.
The print command only prints the main parameters.
Deactivates the GLP printout.
Activates the GLP printout for all calibration and adjustment processes.
The GLP printout is always switched on. All printouts contain a GLP header
and a GLP footer.
Deactivates automatic taring after printer output.
Automatically tares the device after every printout.
Sets the time to 24-hour mode.
— Sets the time to 12-hour mode (AM/PM).
— Is blocked for ISO format.
Sets the date display format to DD.MMM.YY
Sets the date display format to MMM.DD.YY
— Sets the date display format to ISO FORMAT YYYY-MM-DD.
— Sets the time to 24-hour mode.
Explanations
Sets a point as a decimal separator.
Sets a comma as a decimal separator.
Exports text and numbers.
Only exports numbers.
Explanations
Activates the "Toggle between weight units" touch function.
Deactivates the "Toggle between weight units" touch function.
Activates the saving of the last stable weight value not equal to 0.
Deactivates saving.
Activates the "Application filter" touch function.
Deactivates the "Application filter" touch function.
Activates the "Ambient conditions" touch function.
Deactivates the "Ambient conditions" touch function.
System Settings
Entris BCE Operating Instructions
®
25