Symbols Used; Warnings In Operating Instructions; Other Symbols; Safety Instructions - Sartorius Entris II Essential Serie Betriebsanleitung

Safety Instructions

1.4

Symbols Used

1.4.1

Warnings in Operating Instructions

WARNING
Denotes a danger with the risk that death or severe
injury may result if it is not avoided.
CAUTION
Denotes a hazard that may result in moderate or minor
injury if it is not avoided.
NOTICE
Denotes a danger with the risk that property damage
may result if it is not avoided.
1.4.2

Other Symbols

Required action: Describes actions which
t
must be carried out.
Result: Describes the result of the actions
y
carried out.
[ ] Text inside brackets refers to control and
display items.
[ ] Text inside brackets indicates status,
warning, and error messages.
Indicates information for legal metrology for
conformity-assessed (verified) devices.
Conformity-assessed devices are also
referred to as "verified" in these instructions.
Figures on the Operating Display
The figures on the operating display of the device may
deviate from those in these instructions.
6 Entris BCE Operating Instructions
®
2 Safety Instructions
2.1

Intended Use

The device is a high-resolution balance, which can be
used indoors, e.g. in industrial areas. The device was
developed for the accurate determination of the mass of
materials in liquid, paste, powder, or solid form.
Appropriate containers must be used for loading each
type of material.
The device is exclusively designed for use according to
these instructions. Any further use beyond this is
considered improper.
If the device is not used properly: the protective systems
of the device may be impaired. This can lead to
unforeseeable personal injury or property damage.
Operating Conditions for the Device
Do not use the device in potentially explosive
environments. The device may only be used indoors.
The device may only be used with the equipment and
under the operating conditions described in the
Technical Data section of these instructions.
Modifications to the Device
You may not modify or repair the device or make any
technical changes. Any retrofitting or technical changes
to the device are only permitted with prior written
permission from Sartorius.
2.2

Personnel Qualification

If people who do not have sufficient knowledge on the
safe handling of the device carry out work on the device:
Those people may injure themselves or other people
nearby.
Ensure that all individuals working on the device
t
possess the necessary knowledge and qualifications
(description see Kapitel „1.3 Target Groups",
Seite 5).
If a particular qualification is indicated for the actions
t
described: Have these activities carried out by the
required target group.
If no particular qualification is indicated for the
t
actions described: Have these activities carried out
by the "user" target group.