Applic." / "Statist." Menu; Applic." / "Peak.hld." Menu; Applic." / "Check.wg." Menu - Sartorius Entris II Essential Serie Betriebsanleitung

System Settings
7.3.17

"APPLIC." / "STATIST." Menu

Parameter Setting values
PRT.COMP. OFF
ON*
TAR.STAT. OFF*
ON
* Factory setting

7.3.18 "APPLIC." / "PEAK.HLD." Menu

Parameter Setting values
APPLY AT STAB.*
W/O STB.
* Factory setting

7.3.19 "APPLIC." / "CHECK.WG." Menu

Parameter Setting values
INPUT MANUAL*
WG.VALUE
AUTO.PRT. OFF*
ON
OK ONLY
NOT OK
* Factory setting
28 Entris BCE Operating Instructions
®
Explanation
Deactivates the component printout.
Activates the component printout.
Deactivates automatic taring after the components are saved.
Activates automatic taring after the components are saved.
Explanation
Peak values are applied when there is stability.
Peak values are applied without stability.
Explanation
The min / max limits are entered manually.
The entry of the min / max limits is carried out by applying the weight value.
The automatic printing is switched off.
With automatic printing, all values are exported.
With automatic printing, only values that are within the control range are
exported.
With automatic printing, only values that are outside the control range are
exported.