Technical Data; General Data - Sartorius PMA.Evolution EVO1Y1 Installationsanleitung

8

Technical Data

8.1 General Data

Specification
ID code (explosion protection)
Supply voltage
Input voltage
Power consumption
Further data
Ambient conditions
The technical specifications apply under the following ambient conditions:
Environment
Ambient temperature*
Operational capability
Storage and shipping
Relative humidity**
Electromagnetic compatibility
Interference resistance
Transient emissions
Available application programs
AC adapter YPS06-USB
USB power plug (5 V/900 mA)
Primary
Secondary
Further data
10 Installation Instructions EVO1Y1
Unit Value
II 3G Ex ic nA IIB T4 Gc as per EC Type Examination Certificate no.
FM15ATEX0008X
only via USB interface or Sartorius AC adapter YPS06-USB
V +4.5–5.0
DC
W 2.0 (typically)
IP40 in accordance with EN 60529/IEC 60529
For indoor use only.
+10°C to +30°C
°C Guaranteed between +5 and +40
°C -10 to +60
% 15 to 80 for temperatures up to 30°C non-condensing, decreasing
linearly to 50% relative humidity at 40°C
In accordance with EN 61326-1/IEC61326-1
Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 1: General requirements
Basic requirements
Class B
Suitable for use in residential areas and areas that are connected to a
low voltage network that also supplies residential buildings.
Verified scales in accordance with EU requirements comply with the
requirements of Council Directive 2014/31/EC with EN 45501:2015 and
OIML R76:2006.
* For verified scales in accordance with EU requirements, refer to the
information on the scale.
** For verified scales in accordance with EU requirements, the legal
regulations apply.
Recalculation, factor calculation, formula
Type FW7712 (manufacturer's certificate)
100–240 V~, -10%/+10%, 50–60 Hz, 0.125 A
5 V , ± 5%, 900 mA (max.)
DC
Protection class II
IP40 in accordance with EN 60529/IEC 60529