Return - WIKA CPT2500 Betriebsanleitung

10. Dismounting, return and disposal
WARNING!
Physical injury
When dismounting, there is a danger from aggressive media and high
pressures.
▶
Observe the information in the material safety data sheet for the
corresponding medium.
▶
Disconnect the pressure sensor once the system has been
depressurised.
▶
At medium temperatures above 65 °C [149 °F] wear protective gloves.
1. Disconnect the electrical connection to the CPT2500.
2. Unscrew the pressure sensor with a spanner or torque wrench till it is loose using
the spanner flats.
3. Screw out the pressure sensor by hand.
4. Clean the pressure sensor if necessary, see chapter 9.2 "Cleaning".

10.2 Return

Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media in the dismounted instrument can result in a risk to persons,
the environment and equipment.
▶
With hazardous substances, include the material safety data sheet for
the corresponding medium.
▶
For cleaning the instrument, see chapter 9.2 "Cleaning".
When returning the instrument, use the original packaging or a suitable transport
packaging.
To avoid damage:
1. Wrap the instrument in an anti-static plastic film.
2. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft
EN
37