Calibration; Dismounting, Return And Disposal - WIKA CPT2500 Betriebsanleitung

9. Maintenance, cleaning ... / 10. Dismounting, return ...

9.3 Calibration

DAkkS calibration certificate - official certificates
We recommend that the instrument is regularly calibrated by the manufacturer, with time
intervals of approx. 12 months. The default settings will be corrected if necessary.
EN

10. Dismounting, return and disposal

Personnel: Skilled personnel
Protective equipment: Protective gloves
Tools: Spanner or torque wrench
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media in the dismounted instrument can result in a risk to persons,
the environment and equipment.
▶
▶
▶
10.1 Dismounting
WARNING!
Physical injuries and damage to property and the environment
through residual media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
▶
▶
▶
36
Wear the requisite protective equipment.
Observe the information in the material safety data sheet for the
corresponding medium.
Wash or clean the dismounted instrument, in order to protect persons
and the environment from exposure to residual media.
Before storage of the dismounted instrument (following use) wash or
clean it, in order to protect personnel and the environment from exposure
to residual media.
Wear the requisite protective equipment.
Observe the information in the material safety data sheet for the
corresponding medium.
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft