Commissioning, Operation; Usb Pressure Sensor Cpt2500; Mounting The Cpt2500 - WIKA CPT2500 Betriebsanleitung

5. Commissioning, operation

5. Commissioning, operation
Personnel: Skilled personnel
Protective equipment: Protective gloves
Tools: Spanner or torque wrench
Only use original parts (see chapter 12 "Accessories").
WARNING!
Physical injuries and damage to property and the environment
caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
▶
Wear the requisite protective equipment.

5.1 USB pressure sensor CPT2500

5.1.1 Mounting the CPT2500

WARNING!
Physical injury due to aggressive media, high pressures and
temperatures
When mounting, there is a danger from aggressive media, high pressures
and high medium temperature.
▶
Observe the information in the material safety data sheet for the
corresponding medium.
▶
Connect the USB pressure sensor once the system has been
depressurised.
▶
At medium temperatures above 65 °C [149 °F] wear protective gloves.
Only use the USB pressure sensor if it is in perfect condition with respect to safety. Prior
to commissioning, the USB pressure sensor must be subjected to a visual inspection.
▶
Leaking liquid is indicative of damage.
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft
EN
15