Maintenance, Cleaning And Calibration; Maintenance; Cleaning - WIKA CPT2500 Betriebsanleitung

9. Maintenance, cleaning and calibration

9. Maintenance, cleaning and calibration
Personnel: Skilled personnel
Protective equipment: Protective gloves
Tools: Spanner or torque wrench
For contact details, see chapter 1 "General information" or the back page of
the operating instructions.

9.1 Maintenance

The instruments are maintenance-free.
Repairs must only be carried out by the manufacturer.
Only use original parts, see chapter 12 "Accessories".

9.2 Cleaning

CAUTION!
Physical injuries and damage to property and the environment
Improper cleaning may lead to physical injuries and damage to property
and the environment. Residual media in the dismounted instrument can
result in a risk to persons, the environment and equipment.
▶
Use the requisite protective equipment.
▶
Carry out the cleaning process as described below.
1. Before cleaning, correctly disconnect the instrument from the pressure supply,
switch it off and disconnect it from the mains.
2. Clean the instrument with a moist cloth.
3. Electrical connections must not come into contact with moisture!
CAUTION!
Damage to the instrument
Improper cleaning may lead to damage to the instrument!
▶
Do not use any aggressive cleaning agents.
▶
Do not use any hard or pointed objects for cleaning.
▶
Do not use solvents or abrasives for cleaning.
4. Wash or clean the dismounted instrument, in order to protect persons and the
environment from exposure to residual media.
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft
EN
35