Improper Use - WIKA CPT2500 Betriebsanleitung

3. Safety
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Connectors and female
connectors must be protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.

3.3 Improper use

WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and
injuries.
▶
Refrain from unauthorised modifications to the instruments.
▶
Do not use the instruments within hazardous areas.
▶
Do not use the CPT2500 with abrasive or viscous media.
▶
Observe the operating parameters in accordance with chapter
11 "Specifications".
▶
It is forbidden to open the instruments.
▶
Do not use the instruments if they are damaged. Before use, check for
visible defects.
▶
Only use the accessories specified and authorized by WIKA.
CAUTION!
Damage to the instrument through incorrect pressure media
The pressure medium to be measured can lead to material damage to the
pressure sensor.
▶
Check whether the material of the USB pressure sensor is suitable for
the pressure medium to be measured.
This instrument has been designed and tested in accordance with the relevant
safety regulations for electronic measuring instruments. The trouble-free function
and operational safety of the instrument can only be guaranteed if the general safety
measures and the instrument-specific safety instructions given in this operating
instructions are followed.
USB pressure sensor
Before using the instrument, check that there are no cracks on the case or any
■
missing plastic parts. Pay particular attention to the insulation of the connectors.
Pressure sensors should only be fitted or removed when the system is free from
■
pressure.
If the reference pressure sensor is used in applications with oil as a pressure medium,
■
make sure it is not be used with flammable material or gases directly afterwards, since
this can lead to dangerous explosions and a risk to personnel and machinery.
WIKA operating instructions, models CPT2500, CPA2500 and USB-ScanSoft
EN
11