Selftest; Selftest Action; Selftest Ramtest - Hirschmann Hios-2S Rspl Referenzhandbuch

Selftest

48.1 selftest
Configure the selftest settings.

48.1.1 selftest action

Configure the action that a selftest component should take.

Mode: Global Config Mode

Privilege Level: Administrator

Format: selftest action <P-1> <P-2>
Parameter Value
task
P-1
resource
software
hardware
log-only
P-2
send-trap
reboot

48.1.2 selftest ramtest

Enable or disable the RAM selftest on cold start of the device. When disabled
the device booting time is reduced.

Mode: Global Config Mode

Privilege Level: Administrator

Format: selftest ramtest
534
Meaning
Configure the action for task errors.
Configure the action for lack of resources.
Configure the action for broken software in-
tegrity.
Configure the action for detected hardware
errors.
Write a message to the logging file.
Send a trap to the management station.
Reboot the device.
48.1 selftest
RM CLI HiOS-2S RSPL
Release 5.0 05/2015