Address-Conflict Delay; Address-Conflict Release-Delay; Address-Conflict Max-Protection - Hirschmann Hios-2S Rspl Referenzhandbuch

Address Conflict Detection (ACD)
1.1.4

address-conflict delay

The maximum detection delay time in milliseconds. Time gap between ARP
or NDP probes.

Mode: Global Config Mode

Privilege Level: Operator

Format: address-conflict delay <P-1>
Parameter Value
20..500
P-1
1.1.5

address-conflict release-delay

Delay in seconds to the next ARP or NDP probe cycle after an ip address
conflict was detected.

Mode: Global Config Mode

Privilege Level: Operator

Format: address-conflict release-delay <P-1>
Parameter Value
3..3600
P-1
1.1.6

address-conflict max-protection

Maximum number of frequent address protections.

Mode: Global Config Mode

Privilege Level: Operator

Format: address-conflict max-protection <P-1>
92
Meaning
Time gap between consecutive ARP or NDP pro-
bes ([ms], default 200).
Meaning
Delay between consecutive probe cycles after
a conflict was detected ([sec], default 15).
1.1 address-conflict
RM CLI HiOS-2S RSPL
Release 5.0 05/2015