Mrp-Ieee; Mrp-Ieee Global Join-Time; Mrp-Ieee Global Leave-Time - Hirschmann Hios-2S Rspl Referenzhandbuch

MRP IEEE

39.1 mrp-ieee

Configure IEEE MRP parameters and protocols, MVRP for dynamic VLAN
registration and MMRP for dynamic MAC registration on a port.

39.1.1 mrp-ieee global join-time

Set the IEEE multiple registration protocol join time-interval. The join timer
controls the interval between join message transmissions sent to applicant
state machines. An instance of this timer is required on a per-Port, per-MRP
participant basis.

Mode: Interface Range Mode

Privilege Level: Operator

Format: mrp-ieee global join-time <P-1>
Parameter Value
10..100
P-1

39.1.2 mrp-ieee global leave-time

Set the IEEE multiple registration protocol leave time-interval. The leave ti-
mer controls the period of time that the registrar state machine waits in the
leave state before transiting to the empty state. An instance of the timer is
required for each state machine in the leave state.

Mode: Interface Range Mode

Privilege Level: Operator

Format: mrp-ieee global leave-time <P-1>
456
Meaning
Join time-interval in centi-seconds.
39.1 mrp-ieee
RM CLI HiOS-2S RSPL
Release 5.0 05/2015