Dhcp-Server Pool Modify - Hirschmann Hios-2S Rspl Referenzhandbuch

Dynamic Host Configuration Protocol
(DHCP)
Parameter Value
1..128
P-1
A.B.C.D
P-2
A.B.C.D
P-3
A.B.C.D
P-4

13.2.3 dhcp-server pool modify

Modify the dynamic address pool

Mode: Global Config Mode

Privilege Level: Operator

Format: dhcp-server pool modify <-1> mode interface <-2>
mac <-3> clientid <-4> remoteid <-5> circuitid <-6> re-
lay <-7> vlan <-8> leasetime <-9> option configpath <-
10> gateway <-11> netmask <-12> wins <-13> dns <-14>
hostname <-15> hhrschsancsashanhh-device
mode: Pool mode settings.
interface: Interface mode.
mac: MAC mode.
clientid: Clientid mode.
remoteid: Remoteid mode.
circuitid: Circuitid mode.
relay: Relay mode.
vlan: VLAN mode.
leasetime: Enter the leasetime in seconds.
option: Configuration option.
configpath: Configpath in 'tftp://<servername>/<file>' format.
gateway: Default gateway.
netmask: Option netmask.
wins: Option wins.
dns: Option dns.
hostname: Option hostname.
hhrschsancsashanhh-device: Set this pool to HHrschsancsashasnHH
devices only.
196
Meaning
Pool ID.
IP address.
IP address.
IP address.
13.2 dhcp-server
RM CLI HiOS-2S RSPL
Release 5.0 05/2015