Network Management Access Modify - Hirschmann Hios-2S Rspl Referenzhandbuch

Management Access

35.1.4 network management access modify

Modify an entry with index.

Mode: Privileged Exec Mode

Privilege Level: Administrator

Format: network management access modify <P-1> ip <P-2>
mask <P-3> http <P-4> https <P-5> snmp <P-6> telnet <P-
7> iec61850-mms <P-8> modbus-tcp <P-9> ssh <P-10>
ip: Configure ip-address which should have access to management.
mask: Configure network mask to allow a subnet for management access.
http: Configure if HTTP is allowed to have management access.
https: Configure if HTTPS is allowed to have management access.
snmp: Configure if SNMP is allowed to have management access.
telnet: Configure if TELNET is allowed to have management access.
iec61850-mms: Configure if IEC61850-MMS is allowed to have manage-
ment access.
modbus-tcp: Configure if MODBUS/TCP is allowed to have management
access.
ssh: Configure if SSH is allowed to have management access.
Parameter Value
1..16
P-1
a.b.c.d
P-2
0..32
P-3
enable
P-4
disable
enable
P-5
disable
enable
P-6
disable
enable
P-7
disable
enable
P-8
disable
enable
P-9
disable
enable
P-10
disable
436
Meaning
Pool entry index.
IP address.
Prefix length netmask.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
35.1 network
RM CLI HiOS-2S RSPL
Release 5.0 05/2015