Auto-Disable; Auto-Disable Reason - Hirschmann Hios-2S Rspl Referenzhandbuch

Auto Disable

4.1 auto-disable

Configure the Auto Disable condition settings.
4.1.1

auto-disable reason

Enables/disables port Recovery by reason on this device.

Mode: Global Config Mode

Privilege Level: Operator

Format: auto-disable reason <P-1>
Parameter Value
link-flap
P-1
crc-error
duplex-mismatch
bpdu-rate
port-security
overload-detection
speed-duplex
no auto-disable reason

Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no auto-disable reason <P-1>
108
Meaning
Enable/disable link-flap.
Enable/disable crc-error.
Enable/disable duplex-mismatch.
Enable/disable bpdu-rate.
Enable/disable MAC based port security.
Enable/disable overload-detection.
Enable/disable link speed and duplex moni-
tor.
4.1 auto-disable
RM CLI HiOS-2S RSPL
Release 5.0 05/2015