Dhcp-L2Relay Circuit-Id; Dhcp-L2Relay Remote-Id Ip - Hirschmann Hios-2S Rspl Referenzhandbuch

DHCP Layer 2 Relay

14.2.2 dhcp-l2relay circuit-id

This commands enables setting the Option-82 Circuit ID in DHCP messages
to an interface descriptor.

Mode: VLAN Database Mode

Privilege Level: Operator

Format: dhcp-l2relay circuit-id <P-1>
Parameter Value
1..4042
P-1
no dhcp-l2relay circuit-id

Disable the option

Mode: VLAN Database Mode

Privilege Level: Operator

Format: no dhcp-l2relay circuit-id <P-1>

14.2.3 dhcp-l2relay remote-id ip

This commands sets the Option-82 Remote ID to the IP address of device (if
any assigned, else fails).

Mode: VLAN Database Mode

Privilege Level: Operator

Format: dhcp-l2relay remote-id ip <P-1>
Parameter Value
1..4042
P-1
204
Meaning
Enter the VLAN ID.
Meaning
Enter the VLAN ID.
14.2 dhcp-l2relay
RM CLI HiOS-2S RSPL
Release 5.0 05/2015