General Safety Directions For Power Tools - Parkside PKSA 20-Li C3 Originalbetriebsanleitung

This device is part of the
( Parkside) X 20 V TEAM se-
ries
Graphical symbol beneath the chain
sprocket:
Observe direction of travel of the saw chain.
Caution! Read the operating instructions.
Graphical symbol on the blade:
Direction of travel
of the saw chain
Graphical symbol on the oil tank
cap: Saw chain lubrication.
Graphical symbol on the fi xing screw for
the chain sprocket cover:
OPEN
CLOSE
Graphical symbol on the chain brake lever:
1
chain brake: OFF
2
chain brake: ON
Symbol on the screw for the chain quick-
tensioning system:
loosen
tighten
General Safety Directions
for Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fi re and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
GB
39