Symbols Used In The Instructions; General Notes On Safety; General Safety Instructions For Power Tools - Parkside PKS 2200 A1 Originalbetriebsanleitung

Graphical symbol on the ixing screw for
the chain sprocket cover:
OPEN
CLOSE
Graphical symbol on the chain brake lever:
chain brake: OFF
chain brake: ON
Symbol on the screw for the chain quick-
tensioning system:
loosen
tighten
Symbols used
in the instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Precaution symbol with information
on prevention of harm / damage.
Wear protective gloves in order to
avoid cutting yourself!
Notice symbol with information on
how to handle the device properly.

General notes on safety

Before you do any work with the elec-
tric chainsaw, make yourself familiar
with all operating parts. Practise using
the saw (sawing logs on a sawhorse)
and get an experienced user or a
specialist to explain to you the func-
tion of the saw, the way of working,
the techniques of sawing and the
personal protection equipment.
Observe noise control and local
regulations.
Caution! When using power tools,
observe the following basic safety
measures for the prevention of
electric shocks and the risk of injury
and ire. There is a risk of injury!
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, ire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
Work area safety
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in
explosive atmospheres, such as
GB MT
89