Symbols Used In The Instructions; General Notes On Safety; General Safety Instructions For Power Tools - Parkside PKS 2200 A1 Originalbetriebsanleitung

GB IE
Graphical symbol on the oil tank
cap: Saw chain lubrication.
Graphical symbol on the fixing screw for
the chain sprocket cover:
OPEN
CLOSE
Graphical symbol on the chain brake lever:
chain brake: OFF
chain brake: ON
Symbol on the screw for the chain quick-
tensioning system:
loosen
tighten
Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Precaution symbol with information
on prevention of harm / damage.
Wear protective gloves in order to
avoid cutting yourself!
Notice symbol with information on
how to handle the device properly.
36

General notes on safety

Before you do any work with the
electric chainsaw, make yourself
familiar with all operating parts.
Practise using the saw (sawing logs
on a sawhorse) and get an experi-
enced user or a specialist to explain
to you the function of the saw, the
way of working, the techniques of
sawing and the personal protection
equipment.
Observe noise control and local
regulations.
Caution! When using power tools,
observe the following basic safety
measures for the prevention of
electric shocks and the risk of injury
and fire. There is a risk of injury!
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
1) Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.