General Safety Directions For Power Tools - Parkside PKSA 40-Li A1 Originalbetriebsanleitung

GB IE
Wear cut-protection safety boots
with anti-slip soles.
Always use the chainsaw with
both hands.
Caution! Spring-back - Be careful of
spring-back of the machine during
work.
Do not expose the unit to rain. The
device must not be wet, nor should
it be operated in a moist environ-
ment.
Maintenance and cleaning work
must always be carried out with the
motor switched off and the batteries
removed.
Sound power level guaranteed
105
456 mm
Length of the chain bar
Machines do not belong with do-
mestic waste.
Chain brake
Battery charge level indicator
high low
Control panel
high/low
This device is part of the Park-
side X 20 V TEAM series
Graphical symbol beneath the chain
sprocket:
36
Observe direction
of travel of the saw
chain. Caution!
Read the operating
instructions.
Graphical symbol on the blade:
Direction of travel
of the saw chain
Graphical symbol on the oil tank
cap: Saw chain lubrication.
Graphical symbol on the fixing screw for
the chain sprocket cover:
OPEN
CLOSE
Graphical symbol on the chain brake lever:
chain brake: OFF
chain brake: ON
Symbol on the screw for the chain quick-
tensioning system:
loosen
tighten
Graphical symbol on the packaging:
Please dispose of packaging and
product in an environmentally
friendly manner.
Recycling symbol: Corrugated card-
board
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this