Charging Time - Parkside PKSA 20-Li C3 Originalbetriebsanleitung

The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples of
measures to reduce vibration expo-
sure are the wearing of gloves when
using the tool and limiting the work-
ing hours. All parts of the operating
cycle are to be taken into account in
this (for example times in which the
electric tool is turned off and those in
which even though it is turned on, it
is not running under a load).

Charging time

(min)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart
PLGS 2012 A1
PAP 20 A1
PAP 20 A2
PAP 20 B1
60 90
45 60
35 45
35 45
35 40
Charging time
The device is part of the ( Parkside)
X 20 V TEAM series and can be ope-
rated with batteries of the ( Parkside)
X 20 V TEAM series.
Batteries of the ( Parkside) X 20 V TEAM
series may only be charged using chargers
of the ( Parkside) X 20 V TEAM series.
We recommend that you operate this appli-
ance with the following batteries only:
PAP 20 B1, PAP 20 B3.
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C3,
PDSLG 20 A1
PAP 20 A3
PAP 20 B3
Smart PAPS 204 A1
120
80
60
60
40
GB
Smart
PAPS 208 A1
240
165
120
120
55
37