Notes On Safety; Symbols Used In The Instructions; Symbols Used On The Saw - Parkside PKSA 20-Li C3 Originalbetriebsanleitung

GB

Notes on safety

This section deals with the basic safety
regulations while working with the chainsaw.
A chainsaw is a dangerous device,
which can cause serious or even
fatal injuries with incorrect or care-
less use. Thus, for your own safety
and the safety of others, you should
always take note of the instructions
on safety and, in case of diffi culties,
consult a specialist for advice.
Symbols used in the
instructions
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Notice symbol with information on
how to handle the device properly.
Wear protective gloves in order to
avoid cutting yourself!

Symbols used on the saw

A chainsaw is a dangerous device,
which can cause serious or even
fatal injuries with incorrect or care-
less use. Thus, for your own safety
and the safety of others, you should
always take note of the instructions
on safety and, in case of diffi culties,
consult a specialist for advice.
38
Read and take note of the operating
manual belonging to the machine
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face protec-
tion, safety helmet, cut-protection
working clothes and ear protection
Use protective clothing
Wear cut-protection gloves
Wear cut-protection safety boots
with anti-slip soles.
Always use the chainsaw with
both hands.
Caution! Spring-back - Be careful of
spring-back of the machine during
work.
Do not expose the unit to rain. The
device must not be wet, nor should
it be operated in a moist environ-
ment.
Maintenance and cleaning work
must always be carried out with the
motor switched off and the batteries
removed.
98 Sound power level guaranteed
307 mm
Length of the chain bar
Machines do not belong with do-
mestic waste.
Chain brake