Technical Data; Unpacking; Before Commissioning - Scheppach HC24-8 Original Bedienungsanleitung

• Residual risks can be minimised if the "Safety infor-
mation" and the "Proper use" together with the oper-
ating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this operating manual. This is how to ensure that
your machine provides optimum performance.
• Keep your hands away from the work area, when the
machine is in operation.
7.

Technical data

Mains connection
Motor power
Operating mode
Compressor speed
Pressure vessel capacity
Operating pressure
Theo. intake capacity
Theo. Power output
Protection category
Device weight
Oil (DAB 46)
Max. altitude (above mean sea
level)
Technical changes reserved!
The noise emission values have been determined in
accordance with EN ISO 3744.
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
28 | GB

8. Unpacking

• Open the packaging and carefully remove the de-
• Remove the packaging material, as well as the pack-
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
• If possible, keep the packaging until the expiry of the
• Familiarise yourself with the product by means of the
230 V~ 50 Hz
max. 750 W
• With accessories as well as wearing parts and re-
S1
2850 min
-1
• When ordering please provide our article number as
approx. 24 l
approx. 8 bar
m WARNING!
approx. 118 l/
The device and the packaging material are not
min
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
approx. 83 l/min
choking or suffocating!
IP30
9.
approx. 19 kg
approx. 0.23 l
• Before connecting the machine, make certain that
1000 m
• Prior to initial commissioning, remove the transport
• Check the device for transport damage. Report
• Install the compressor near the point of consump-
• Avoid long air lines and supply lines (extension ca-
• Make sure that the intake air is dry and free of dust.
• Do not deploy the compressor in damp or wet areas.
94dB(A) • Operate the compressor only in suitable areas (well
71.7dB(A)
2.17dB(A)
• The compressor is designed to be used in dry
www.scheppach.com
vice.
aging and transport safety devices (if present).
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
warranty period.
operating instructions before using for the first time.
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
well as type and year of manufacture for your equip-
ment.

Before commissioning

the data on the type plate matches with the mains
power data.
plug (12) and fill the compressor pump housing with
oil as described in item 10.4.
any damage immediately to the transport company
which was used to deliver the compressor.
tion.
bles).
ventilated, ambient temperature +5°C to 40°C).
There must be no dust, acids, vapours, explosive
gases or inflammable gases in the room.
rooms. It is prohibited to use the compressor in are-
as where work is conducted with sprayed water.