Spare Parts - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

Trouble-shooting
90
9.4

Spare parts

If ordering spare parts, please specify the serial number of the unit!
Housing
Certification:
A Non hazardous areas + ATEX Ex ia
B ATEX Ex d
Material:
A Aluminum, HART
B Stainless steel 316L, HART
C T17, HART
F Aluminum, FF
G Stainless steel 316L, FF
H T17, FF
Cable entry:
1
2
4
TMT162G-
Electronics
Certification:
A Non hazardous areas
B ATEX Ex ia, FM IS, CSA IS
Sensor input; communication:
A 1x; HART
B 2x; config. output sensor 1; HART
C 2x; FF Rev. 1
D 2x; PA
E 2x; FF Rev. 2
Configuration:
A
B
K
L
TMT162E-
2 x thread NPT ½" + terminal block + 1 blanking plug
2 x thread M20x1.5 + terminal block + 1 blanking plug
2 x thread G½" + terminal block + 1 blanking plug
Model:
A Standard
A  Order code
50 Hz line voltage filter
According to original order (specify serial no.) 50 Hz mains filter
60 Hz line voltage filter
According to original order (specify serial no.) 60 Hz mains filter
 Order code
TMT162
T09-TMT162ZZ-09-00-xx-xx-001
Endress+Hauser