Electromagnetic Compatibility (Emc) - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

Technical data
98
Storage temperature
• Without display: -40 to +212 °F (-40 to +100 °C)
• With display: -40 to +176 °F (-40 to +80 °C)
Altitude
Up to 6560 ft (2000 m) above sea level according to IEC 61010-1 (EN 61010-1), CSA
1010.1-92
Climate class
As per IEC 60 654-1, Class C
Degree of protection
• Aluminum die-cast or stainless steel housing IP67, NEMA 4X
• Stainless steel housing for hygienic applications (T17 housing): IP66/IP68 (1.83 m H
for 24 h), NEMA 4X, NEMA 6P
Shock and vibration resistance
3g / 2 to 150 Hz as per IEC 60 068-2-6
Care should be taken when using L-form brackets (see wall/tube 2" brackets in Sec-
tion 'Accessories') since this can cause resonance. Caution: vibrations at the trans-
mitter must not exceed the specified values.
Electromagnetic
compatibility (EMC)
CE Electromagnetic Compatibility Compliance
EMC meets all relevant requirements listed under EN 61326 Series and NAMUR NE21.
Details as per declaration of conformity.
This recommendation is a uniform and practical way of determining whether the devices
used in laboratories and process control are immune to interference with an objective to
increase its functional safety.
ESD (Electrostatic discharge)
Electromagnetic fields
Burst (fast transient)
Surge
Conducted RF
Condensation
Permitted
Measuring category
Measuring category II as per IEC 61010-1. The measuring category is provided for
measurements at circuits with a direct electrical connection to the low voltage supply.
Pollution degree
Pollution degree 2 as per IEC 61010-1
IEC 61000-4-2 6 kV cont., 8 kV air
IEC 61000-4-3 0.08 to 2 GHz
0.08 to 2 GHz
2 to 2.7 GHz
IEC 61000-4-4 2 kV
IEC 61000-4-5 0.5 kV sym.
IEC 61000-4-6 0.01 to 80 MHz
TMT162
O
2
10 V/m
30 V/m
1V/m
10 V
Endress+Hauser