Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung Seite 81

TMT162
®
Available in ReadWin 2000, HART
Commuwin II with Matrix address
Diagnostics Display of information required for device diagnostics.
• Device status or error code
(See chapter 9.2 "Error messages")
• Last error code (status) or previous error code
(See chapter 9.2 "Error messages")
• Status sensor 1 (0 = no error; 0  error)
• Status sensor 2 (0 = no error; 0  error)
• Configuration changed
Diagnostics • Static revision
The "Static revision" is increased on every parameter change. This is for
compliance to 21 CFR Part 11, showing that no further parameter
changes have been made.
• Sensor 1 max. value
• Sensor 1 min. value
• Sensor 2 max. value
• Sensor 2 min. value
• RJ max. value
• RJ min. value
Display of the maximum process value. The process value will be accepted
after starting the measurement.
Display of the minimum process value. The process value will be accepted
after starting the measurement.
Display of the maximum and minimum measured temperatures of the
internal Pt100 DIN B comparison measurement point.
• Maximum process value is changed to the actual process value on write
access. On reset to factory default value the default value is entered -
10000.
• Minimum process value is changed to the actual process value on write
access. On reset to factory default value the default value is entered
+10000.
®
Available in ReadWin 2000, HART
Commuwin II with Matrix address
Measuring point
Input and display of the information relating to the measuring point identification
Measuring Input: 8 characters
point TAG
Description Input: 16 characters
Message Input: 32 characters
Device information
Display of the information relating to the device identification
Commuwin Special Commuwin device version, e.g.: 8010 means Version 1.0
device version
Device release Display of device release
Serial number 11 digit display of the Endress+Hauser device serial number
(equal to that on the legend plate).
Endress+Hauser
Function group DIAGNOSTICS
®
handheld module DXR275/375,
Function group IDENTIFICATION
®
handheld module DXR275/375,
®
ReadWin 2000 DXR275/375,
FieldCare
+ +
+ +
- +
- +
+ +
- -
+ +
+ +
+ +
+ +
+ +
+ +
®
ReadWin DXR275/375,
2000 FieldCare
+ +
+ +
- +
- -
- +
+ +
Commissioning
CW II-
Matrix
• V9H0
• V9H1
• V0H4
• V0H6
• V9H2
• V9H3
• V8H0
• V8H1
• V8H2
• V8H3
• V8H4
• V8H5
CW II-
Matrix
VAH0
VAH1
VAH3
VAH2
VAH4
81