Before Starting The Equipment - Scheppach P-MGB5-1 Anleitung

Information concerning noise emission measured according to relevant standards:
Sound pressure L = 95,7 dB(A)
pA
Sound power L = 114,9 dB(A)
WA
Uncertainty K = 3 dB(A)
PA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibrations:
Grass trimmer: Ahv = Front 6,12 m/s2 Rear 6,14 m/s2
Brush cutter: Ahv = Front 7,09 m/s2 Rear 7,31 m/s2
Hedge trimmer: Ahv = Front 5,08 m/s2 Rear 7,75 m/s2
Pole saw: Ahv = Front 3,13 m/s2 Rear 4,62 m/s2
Leaf blower: Ahv = Front 6,95 m/s2 Rear 6,43 m/s2
Uncertainty KPA = 1,5 m/s2
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
In these operating instructions we have marked the places that have to do with your safety
with this sign: m

7. Before starting the equipment

Each time before use, check the following:
• That there are no leaks in the fuel system.
• That the equipment is in perfect condition and that the safety devices and cutting devices are complete.
• That all screws are securely fastened.
• That all moving parts move smoothly.
Fuel and oil
Recommended fuels
Use only a mixture of unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture as in-
dicated in the fuel mixing table.
Important: Do not use a fuel mixture which has been stored for longer than 90 days.
Important: Never use 2-stroke oil with a recommended mixing ratio of 100:1. The manufacturer's
warranty will be voided in case of engine damage due to inadequate lubrication.
Important: Only use containers designed and approved for the purpose to transport and store fuel.
Pour the correct quantities of petrol and 2-stroke oil into the mixing bottle (see scale printed on the
bottle). Then shake the bottle well.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB | 49