Intended Use - Scheppach P-MGB5-1 Anleitung

Fig. 1 + 2
• Motor drive unit
• Pole saw
• Hedge trimmer
• Power scythe
• Grastrimmer
• Spark plug wrench (19)
• Open-ended spanner (8 mm / 10 mm) (20)
• Allen key (size 4) (21)
• Allen key (size 5) (22)
• 3 x cable ties (23)
• Combined oil/petrol cylinder (24)
• Belt (25)
• Front handle (Fig. 2)
• 4 screws M5 x 35 (Fig. 2)
• Cover (Fig. 2)
• 4 nuts M5 (Fig. 2)

4. Intended use

The brush cutter (using the cutting blade) is designed for cutting young trees, strong weeds and
undergrowth.
The power trimmer (using the line spool with cutting line) is designed for cutting lawns, grassed
areas and small weeds.
The hedge trimmer is suitable for cutting hedges, bushes and shrubs.
The pole-mounted petrol-powered pruner is designed for lopping off tree branches. It is not suita-
ble for extensive sawing work, felling trees or sawing any materials other than wood.
The blower is designed to blow leaves as well as lawn debris such as grass clippings and small twigs.
It is not to be used for any other purpose.
The device is only to be used on dry surfaces.
The operating instructions as supplied by the manufacturer must be obeyed to ensure that the
equipment is used properly. Any use which is not expressly permitted in the manual may result in
damage to the equipment and place the user in serious danger. Be sure to observe the restric-
tions in the safety instructions.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the equipment is used in commercial, trade or indus-
trial businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury to the user, the petrol power scythe must not be
used to carry out the following work: to clean dirt and debris off walkways, or to chop up tree or
hedge clippings. Similarly, the petrol power scythe must not be used to level out high areas such
as molehills. For safety reasons, the petrol power scythe must not be used as a drive unit for other
work tools or toolkits of any kind.
The equipment is allowed to be used only for its prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
44 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58