• Chain tension too high.
Pole saw does not
• Chain blunt.
saw, it plucks or
• Chain attached incorrectly.
vibrates.
• Chain worn.
Saw chain be-
• No oil in the tank.
comes hot or saw
• Oil line blocked.
chain lubrication
• Chain tension too high.
does not work.
• Chain blunt.
66 | GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
• Check and reset chain tension.
• Have the chain sharpened or replace it.
• Re-attach the chain.
• Replace the chain.
• Refill oil.
• Clean the oil line.
• Set the chain tension.
• Have the chain sharpened or replace it.