Establishing The Data Connection; Possible Communication Channels - Fronius Ohmpilot Bedienungsanleitung

Establishing the Data Connection

Possible The data connection is primarily required so that the inverter or Datamanager can share
Communication default values with the Ohmpilot. For some applications, however, it is also necessary to
Channels implement settings via the Ohmpilot website.
There are 3 possible communication channels:
-
-
-
Modbus RTU (via RS 485)
LAN (Ethernet)
WLAN
NOTE! The Datamanager 2.0 must have software version 3.8.1-x or a later ver-
sion installed.
85