Safety Rules; General Remarks; Environmental Conditions - Fronius Ohmpilot Bedienungsanleitung

Safety Rules

General Remarks

Environmental
Conditions
The device has been manufactured in accordance with the state of the art
and the recognised safety rules. However, incorrect operation or misuse may
result in:
- Injury or death to the operator or third parties
- Damage to the device and other property of the operator
- Inefficient operation of the device
All persons involved in commissioning, maintaining and servicing the device
must:
- Be suitably qualified
- Have knowledge of and experience in dealing with electrical installations
- Read and follow these operating instructions carefully
The operating instructions must be kept at the location where the device is
being used at all times. In addition to the operating instructions, the generally
applicable and local regulations on accident prevention and environmental
protection must be observed.
All safety and danger notices on the device:
- Must be in a legible state
- Must not be damaged
- Must not be removed
- Must not be covered, pasted or painted over
The heatsink can reach high temperatures.
Only operate the device when all protection devices are fully functional. If the
protection devices are not fully functional, this may result in:
- Injury or death to the operator or third parties
- Damage to the device and other property of the operator
- Inefficient operation of the device
Any safety devices that are not functioning properly must be repaired by a
suitably qualified technician before the device is switched on.
Never bypass or disable protection devices.
For the location of the safety and danger notices on the device, refer to the
"General Remarks" section in the operating instructions for the device.
Before switching on the device, rectify any faults that could compromise
safety.
This is for your personal safety!
Operating or storing the device outside the specified area is regarded as not
complying with the intended purpose. The manufacturer shall not be liable for
any damage or loss resulting from this.
For exact information on permitted environmental conditions, please refer to
the "Technical Data" in the operating instructions.
55