Choice Of Location - Fronius Ohmpilot Bedienungsanleitung

Choice of
Location
56
The Ohmpilot is suitable for installation indoors.
Do not install the Ohmpilot outdoors.
The Ohmpilot corresponds to protection class IP 54 and is protected
against spray water from all sides.
In order to keep warming of the Ohmpilot to a minimum, do not expose
it to direct sunlight. Install the Ohmpilot in a protected position. The
Ohmpilot must only be installed and operated at an ambient tempera-
ture of 0-40°C.
IMPORTANT!The Ohmpilot must not be installed or used at altitudes
above 2000 m.
Do not install the Ohmpilot in:
- Areas where ammonia, corrosive vapours, acids or salts are present
(e.g. fertiliser stores, ventilation openings from cattle sheds, chemical
plants, tanneries, etc.)
Do not install the Ohmpilot in:
- Places where there is an increased risk of damage from farm ani-
mals (horses, cattle, sheep, pigs, etc.)
- Stables or adjoining areas
- Storage areas for hay, straw, chaff, animal feed, fertilisers, etc.
In principle, the Ohmpilot is designed to be dust-tight. However, in areas
with high dust accumulation, the cooling surfaces may collect dust
and this may impair the thermal performance. In such cases, regular
cleaning is required. Consequently, we do not recommend installing the
Ohmpilot in places and environments with strong dust formation.
Do not install the Ohmpilot in:
- Greenhouses
- Storage or processing areas for fruit, vegetables or winegrowing
products
- Places used to prepare grain, green fodder or animal feeds