Appendix; Overview Of The Functions And Settings - Delta SOLIVIA 11 EU G4 TR Betriebsanleitung

16.

Appendix

16.1

Overview of the functions and settings

The following table contains an overview of all settings that can be made in the solar power inverter.
Function/Characteristic
Settings for MVD/LVD grids
Effective power control
● Power reduction
● Power/Frequency
Reactive power control
● Cos φ constant
● Cos Phi(P)
● Reactive power constants
● Q (U)
Fault Ride-Through (FRT)
Options
Shadowing
Isolation and grounding monitoring
Relay control
External stop
Reports
Storing reports on a USB stick
Showing reports on the display
Italian autotest report
Display settings
Language
Date and time
Date and time formats
Operation and installation manual for SOLIVIA 11 EU G4 TR
Short description
Functions for setting production parameters
For setting the active power control for LVD and MVD
grids
For reducing the maximum power
For setting the power gradient with respect to the fre-
quency
For setting the reactive power control for LVD and MVD
grids
For setting a fixed value for cos φ (inductive or capacitive) 520 Reactive PwCtrl
For setting a value of cos φ (inductive or capacitive)
depending on the active power ratio P/P
For setting the reactive power ratio Q/S
only.
For setting the reactive power ratio Q/S
the voltage U. For MVD grids only.
For setting Q-U hysteresis parameters. For MVD grids
only.
For setting up the extended MPP tracking
For selecting an isolation and grounding monitoring mode
Actuation of up to two relays
Stops feeding the gird when activated by an external
signal
For storing all available reports on USB sticks
For setting the display language
For setting the date and time
For setting the date and time formats
Menu
Manual chapter
500 User settings
"10.4 Active and reactive power con-
trol", p. 39
510 Active PwCtrl
"10.4.2 Active power control", p. 40
511 Power reduction
"10.4.2.2 Power reduction", p. 40
512 Power vs freq
"10.4.2.3 Power/Frequency", p. 40
520 Reactive PwCtrl
"10.4.3 Reactive power control", p. 41
"10.4.3.2 Constant cos φ", p. 41
520 Reactive PwCtrl
"10.4.3.3 Cos Phi(P)", p. 42
n
. For MVD grids 520 Reactive PwCtrl
n
"10.4.3.4 Constant reactive power",
p. 42
as a function of 520 Reactive PwCtrl
n
"10.4.3.5 Q (U)", p. 42
530 FRT settings
"10.4.4 Fault Ride-Through (FRT)",
p. 43
200 Options
"10.5 Options settings", p. 43
210 Shadowing
"10.5.1 Shadowing", p. 43
230 Grounding
"10.5.2 Isolation and grounding moni-
toring", p. 44
240 Relay control
"10.5.3 Relay control", p. 44
250 External stop
"10.5.4 External stop", p. 44
300 USB features
"11.7 Creating reports", p. 48
600 Diagnostic&Alarm
"12.8 Autotest for Italy", p. 53
100 Install settings
"10.2.1 Display language", p. 37
110 Date and time
"10.2.2 Date and time", p. 37
111 Format
"10.2.3 Date and time formats", p. 37
Appendix
EN
59