Operation - Cameo OTOS B5 Bedienungsanleitung

LOCK
10
UNLOCK
11
11 RECESSED GRIPS
In addition to the two transport handles on the base of the unit, there are practical recessed grips
at the top of the inner sides of the two device arms.

OPERATION

NOTES
As soon as the spotlight is correctly connected to the mains supply, "Welcome to Cameo", the
model name and the software version will be displayed in succession during the start process and
motor reset. After this process, the spotlight is ready for operation and the previously activated
operating mode is launched.
The main display is activated automatically if no input is made within approximately 30 seconds.
In the event of a technical fault, the lamp is switched off, the display shows "Lamp Protected"
and the warning triangle symbol appears in the bottom right-hand corner.
10 TILT LOCK
Mechanical locking device used to prevent rotation of the
head in the vertical direction during transport (7 possible
positions). Disconnect the unit from the mains and slide the
locking lever in the direction of the tilt rotation axis, moving
the head of the unit vertically until one of the 7 locking
positions is found and the locking lever engages (LOCK).
Unlock the device before startup (UNLOCK).
11
15