Operation - Cameo PIXBAR G2 Bedienungsanleitung

6
TOUCH-SENSITIVE CONTROLS
MENU- Press MENU to access the main menu. Press again or repeatedly to return to the main
display.
UP and DOWN – Select the menu items in the main menu (DMX address, operating mode, etc.)
and in the sub-menus using UP and DOWN. Change value or status in a menu item, e.g. DMX
address. To quickly change a value, such as the DMX start address, press and hold UP or DOWN.
ENTER – Press ENTER to access the menu level to make value or status changes, and to access
one of the sub-menus. Confirm value or status changes by pressing ENTER.
PLEASE NOTE:
• Before navigating the unit menu, make sure that the control panel is dry and clean
so that its functionality is not impaired.
• Water on the control unit can lead to incorrect operation of the spotlight, e.g. in
outdoor operation. Therefore, after configuring the spotlight, activate the lock
function to prevent incorrect operation by water (Settings -> Display -> Autolock).
7 PRESSURE EQUALISATION ELEMENT
Pressure equalisation element to prevent condensation inside the housing. In order to ensure its
proper function, the element must be protected from contamination.
8 W-DMX ANTENNA
™
Antenna for control via W-DMX
ATTENTION: To ensure IP65 splash resistance for the DMX and network sockets, the
special input and output sockets must be correctly sealed with the IP65 special plugs
or the rubber sealing caps must be used for sealing. When connected correctly, or
when sealed correctly with the rubber sealing caps, the POWER IN and POWER OUT
sockets are protected from spraying water, as in accordance with IP65.

OPERATION

NOTE
• As soon as the spotlight is correctly connected to the power supply, the following are displayed
in succession: "Update wait ..." (for service purposes only), "Welcome to Cameo", the model
name and the software version. After this process, the spotlight is ready for operation and the
previously activated operating mode is launched.
• If there is no input for approx. 30 seconds, the display automatically returns to the main dis-
play.
14
.
™