Cameo OTOS B5 Bedienungsanleitung Seite 18

W-DMX STATUS
™
W-DMX W-DMX
as receiver
deactivated
activated,
not paired
CONTROL MENU (Control)
The control menu enables selection of the various operating modes and their setting options in
the relevant sub-menus. DMX address and DMX operating mode are set in each operating mode
across all operating modes, if relevant.
DMX OPERATION VIA DMX CABLE
From the main display, press MENU to enter the Main Menu. Use UP and DOWN to select the
Control menu and confirm with ENTER. Now select the DMX menu item and confirm again.
Information on the sub-menu items in the DMX menu and the corresponding setting options can
be found in the table below.
DMX
DMX address 001 - 4xx
17CH Basic
Mode 19CH Standard
23CH Extended
Off
On
W-DMX
Force to pair
Transmitter
Unlink All
Transmitting
Standard
18
W-DMX W-DMX
as receiver as receiver
activated activated
and and
paired, paired,
Transmitter no
switched off DMX signal
or out of
range
Setting the DMX start address
Selecting the DMX mode
Deactivate sending of the DMX control signal via
W-DMX
Activate DMX control signal forwarding via W-DMX
Pairing with ready-to-pair W-DMX devices
Disconnect all W-DMX connections
G3
Selection of the W-DMX transmission standard
G4s
W-DMX W-DMX
as receiver as trans-
activated mitter
and with G3
paired, standard
DMX signal activated,
is present DMX signal DMX signal
is present
W-DMX W-DMX
as trans- as trans-
mitter mitter
with G4s with G3
standard standard
activated, activated,
no
is present DMX signal
W-DMX
as trans-
mitter
with G4s
standard
activated,
no
DMX signal