Cameo OTOS B5 Bedienungsanleitung Seite 22

Make the settings as desired (see table, select with UP and DOWN, confirm with ENTER, change
value or status with UP and DOWN, confirm with ENTER).
Master/Alone
Send to XLR
Send to
Master
W-DMX
Delay
Alone
EDIT LOOP (Edit Loop)
The number of steps, the steps themselves (User Scene 1 - 8), the step duration and the fade time
can be set separately for all eight loops. Starting from the main display, press MENU to enter the
main menu. Use UP and DOWN to select the menu item Control and confirm with ENTER. Select
Stand Alone, confirm, select Edit Loop, select the desired loop for editing and confirm again.
22
Off
On
Force to pair
Unlink All
G3
Transmitting
Standard
G4s
Off / 0.1s to 2.0s
Control signal is forwarded via DMX OUT
Deactivate sending of the DMX control signal via
W-DMX
Activate DMX control signal forwarding via W-DMX
Pairing with ready-to-pair W-DMX devices
Disconnect all W-DMX connections
Selection of the W-DMX transmission standard
Set delay for slave units
Do not forward control signal