Operation - Cameo F1 FC Bedienungsanleitung

11 BATTERY
Male 4-pin XLR socket connection to an external rechargeable battery (battery not included). A mounting plate with V-mount adapter and connection
cable is optionally available (article number CLF1VMOUNTAP).

OPERATION

NOTE
• As soon as the spotlight is correctly connected to the power mains, "Welcome to Cameo", the model designation, and then the software
version are displayed in sequence on the display as part of the startup process. Once the process is complete, the spotlight is ready for use
and resumes whichever mode was most recently activated.
• If one of the DMX modes or the Slave mode is active and no control signal is present at the DMX input, then the symbols on the display
will begin to blink.
• If no input is received within approx. 1 minute, then the currently activated operating mode will be shown automatically on the display
(main display).
DISPLAY MAIN DISPLAY DMX OPERATING MODE
The main display in DMX mode shows the currently configured DMX start address, the DMX mode and other information (see illustration).
currently activated mode
DMX start address and DMX mode
Press encoder =
select mode
6
= DMX signal present = no DMX signal
 
4CH Direct
Fan mode
Press encoder =
Open main menu