Cameo OTOS B5 Bedienungsanleitung Seite 26

Move in
Wheels
Black
On
Sun
Protection
Off
Hold
Last Stand Alone
Signal Fail
Fade to Black
Blackout
Full
Signal Fail
Sun Protection
User A
Store
User B
Default
User C
SERVICE MENU (Service)
Starting from the main display, press MENU to enter the Main Menu. Use UP and DOWN to select
Service and confirm with ENTER.
Information on the sub-menu items in the Service menu and the corresponding setting options
can be found in the table below.
Service
Factory
User A
Default
Values
User B
User C
Pan / Tilt
Reset Head
All
26
On
Off
Reset to factory setting
Reset to User A values (save user values: Settings -> Set Def. values)
Reset to User B values (save user values: Settings -> Set Def. values)
Reset to User C values (save user values: Settings -> Set Def. values)
Resets pan / tilt motors
Resets motors in the device head
Resets all motors
Blackout on value changes in the colour
and gobo wheel
Function disabled
The unit head is directed downwards and
the shutter is closed
Function disabled
Last command is maintained if the control
signal is interrupted
In case of control signal interruption, the
last activated stand-alone operation is
started
Fade out over 10 seconds on control signal
interruption
Instant blackout if the control signal is
interrupted
Maximum brightness in case of control
signal interruption
Sun Protection is activated in case of
control signal interruption
Save user settings A
Save user settings B
Save user settings C